AC type 60W series with charging

Category：Security equipment
Browse number：
QR code：
Release time：2023-08-30 14:45:58

I want to make an inquiry

Product description

Detailed description:

• Small size and light weight. • High reliability and low price. • The circuit has a wide input voltage range. • High conversion efficiency and low operating temperature rise. • Built-in filter circuit, less external radiation interference. • It has basic protection circuit and good adaptability to the environment. • 4 hours, 100% full load aging and full range of functional tests.
parameter model characteristic	SACF-060-1H	SACF-060-1K03	SACF-060-1I02	SACF-060-1B+
Rated output voltage	DC +12V BAT +13.8V	DC +15V BAT +18.5V	DC +18V BAT +21.5V	DC +24V BAT +27.6V
Output interface location	The six-digit P=9.5mm terminal block is marked DC+12V, DC-; BAT+, BAT-
Rated output current	5A 0.5A	3.5A 0.5A	3.5A 0.5A	2.5A 0.5A
Load current range	0～5A ( MAX=5A ) 0～0.5A ( MAX=0.5A )	0～3.5A ( MAX=3.5A ) 0～0.5A ( MAX=0.5A )	0～3.5A ( MAX=3.5A ) 0～0.5A ( MAX=0.5A )	0～2.5A ( MAX=2.5A ) 0～0.5A ( MAX=0.5A )
Output voltage ripple	Vp-pmax<120 mV Vp-pmax<200mV
Li ; Lo Adjustment rate	Line:±0.5%；Load:±3% Line:±1%；Load:±15%
Comprehensive voltage stabilization accuracy	±5% ±20%
Rated output power	60W
Rated working efficiency	≥70% (output power is rated value)
Rated input voltage	Operating voltage: AC176V-264V Rated voltage: AC220V Interface location: Three-position covered socket marked AC-L, AC-N, FG
Rated input current	Rated current: AC0.6A, current range AC0.2～1.0Ab
AC input frequency	Rated AC voltage frequency range 47～63Hz, sine wave
Input surge current	The impact current on the power supply grid at the moment of power-on: the maximum value during cold start is 60A/10mS.
Output overload protection	The overload protection point is about 120%~220% of the rated output power; the overload protection is an online power limiting and voltage reduction method; the short circuit protection is an online power limiting method
UPS battery management function	An external battery (capacity 3~6AH) is required for backup power supply. When the AC power supply is stopped, the system automatically switches to the backup power supply. The system conversion is ≤50mS. When the AC power supply is normal, it automatically switches to the AC power supply and manages the battery.
	It has the function of float charging external batteries (3~6AH). The battery has an undervoltage of 10V±0.6V when the load is discharged. The short-circuit protection function can be automatically reset. The battery short-circuit protection needs to be restarted after backup.
Power time parameters	Preparation time (SETUP TIME) ≈ 200mS; Stability time (RISE TIME) ≈ 50mS; Holding time (HOLD UP TIME) ≈ 20mS
Electrical strength parameters	Input-output: >AC1.5KV; Input-casing: >AC1.5KV; Output-casing: >AC0.5KV Leakage current <5mA 50Hz 1min.
Operating temperature parameters	The working temperature drift coefficient is about ±0.03[%/℃]; the absolute temperature rise coefficient is about 0.50[℃/W]; when the working output is rated power, the absolute temperature rise of the body is 25℃±5℃
Environmental condition parameters	Storage environment: -20℃～+85℃; 10%～95%RH. Working environment: -10℃～+50℃; 20%～90%RH. (Varies depending on usage environment and power)
Working heat dissipation method	Designed to work continuously, with self-cooling to assist heat dissipation. (Differences in usage environment and installation location affect power usage and lifespan)
Appearance installation dimensions	Specifications and dimensions: L130×W98×H37mm3; Installation dimensions: L52×W31mm2, L125×W0mm2
Net weight and appearance	The total weight is about 416g; the bottom shell is made of 1.2mm thick aluminum with a silver sand-oxygen surface treatment; the cover shell is 0.5mm thick iron with a silver electroplastic surface treatment.
Certified safety specifications	National standard GB-4943
Note: 1) The above detection indicators are measured under the following conditions: within the input rated voltage and output rated load range, the environment is 25℃, 85%RH. , when there is no wind around 2) Output DC voltage ripple detection: Use a parallel twisted wire with a length of 30cm and a cross-section of 1mm2 connected to one end of a 0.1μF and 0.47μF capacitor to bypass the detection point and detect 100Hz respectively. The maximum peak-to-peak value of the main frequency ripple is Vp-p100Hz and the maximum peak-to-peak value of the comprehensive ripple is Vp-pmax. 3) Li voltage regulation rate: when the load is at the rated value, the input voltage changes within the rated range; Lo load regulation rate: when the input is at the rated voltage value, the load changes from zero to the rated value.